home *** CD-ROM | disk | FTP | other *** search
/ MacWorld: Complete Mac Interactive / Macworld Complete Mac Interactive CD)(1994).iso / Software / More Shareware⁄Freeware / Telecom Tools / Express Modem 14.4 ver 1.0 / Express Modem 14.4 ver 1.0.rsrc / TEXT_130.txt < prev    next >
Text File  |  1994-03-21  |  3KB  |  106 lines
  1. S registers
  2.  
  3. DefaultRangeUnits
  4.  
  5. S0            Number of rings to auto answer
  6.                     00:255Number of rings
  7.  
  8. S1            Ring counter
  9.                     00:255Number of rings
  10.  
  11. S2            Escape Character
  12.                     43 <+>0:127ASCII Decimal
  13.  
  14. S3            Line-termination character
  15.                     13 <CR>0:127ASCII Decimal
  16.  
  17. S4            Line-feed character
  18.                     10 <LF>0:127ASCII Decimal
  19.  
  20. S5            Backspace character
  21.                     8 <BS>0:127ASCII Decimal
  22.  
  23. S6            Initial blind dialing wait
  24.                     22:255Seconds
  25.  
  26. S7            Carrier wait
  27.                     501:255Seconds
  28.  
  29. S8            Pause time
  30.                     20:255Seconds
  31.  
  32. S9            Carrier detect response time
  33.                     61:2551/10 second
  34.  
  35. S10        Disconnect timing
  36.                     141:2551/10 second
  37.  
  38. S11        Duration and spacing for DTMFdialing
  39.                     9550:255Milliseconds
  40.                     Register S11 is preset and should remain unchanged to
  41.                     assure correct dialing.
  42.  
  43. S12        Escape code guard time
  44.                     5020:2551/50 second
  45.  
  46. S18        Self-test duration
  47.                     00:255Seconds
  48.  
  49. S36        Negotiation failure treatment
  50.                     50/3/4/5Settings
  51.                     Specifies action that should be taken when an attempt to
  52.                     connect in error-control mode fails.
  53.             0    Attempts V.42 connection. Hangs up if remote modem doesn‚Äôt
  54.                     support V.42.
  55.             3    Makes asynchronous connection. No error control. Same as
  56.                     AT&Q0.
  57.             4    Attempts V.42 connection. If attempt fails, attempts MNP
  58.                     2‚Äì4 connection. If attempt fails, then hangs up.
  59.             5    Attempts V.42 connection. If attempt fails, attempts MNP
  60.                     2‚Äì4 connection. If attempt fails, then attempts
  61.                     asynchronous connection. (default)
  62.  
  63. S37     Desired DCE connection speed
  64.                     00/3:11Settings
  65.                     This value is used in conjunction with the ATN and ATB
  66.                     values to determine which modulations are attempted when
  67.                     connecting.
  68.             0    Auto-mode  Attempts to connect at the highest possible
  69.                     speed. (default)
  70.             3    Attempts to connect at 300 bps.
  71.             5    Attempts to connect at 1200 bps.
  72.             6    Attempts to connect at 2400 bps.
  73.             7    Attempts to connect at 4800 bps.
  74.             8    Attempts to connect at 7200 bps.
  75.             9    Attempts to connect at 9600 bps.
  76.         10    Attempts to connect at 12000 bps.
  77.         11    Attempts to connect at 14400 bps.
  78.  
  79. S38     Delay before hang up.
  80.                     00:254Seconds
  81.  
  82. S46        V.42 bis data compression selection
  83.                     138136/138Settings
  84.                     136V.42 only
  85.                     138V.42 with V.42 bis compression. (default)
  86.  
  87. S48        Feature negotiation action
  88.                     70/3/7/128 Settings
  89.                     Selects which error control features are allowed when
  90.                     making connections.
  91.             0    Negotiation disabled: try only V.42.
  92.             3    Negotiation enabled without detection phase.
  93.             7    Negotiation enabled with detection phase. (default)
  94.     128 Negotiation disabled: try MNP only. V.42 disabled.
  95.  
  96. S95        Error control negotiation message option
  97.                     324/8/32Bits
  98.                     A bit map to enable different result codes. Linked to ATW
  99.                     when ATW=1.
  100.     BitValueMeaning
  101.  
  102. 0‚Äì11    not used
  103.         24    Enables CARRIER messages only.
  104.         38    Enables CARRIER+PROTOCOL messages only.
  105.     416    not used
  106.     532    Enables CARRIER+PROTOCOL+COMPRESSION messages. (default)